|
| |
A.M.P Rose 'ELW' Lollipop Cut
and Wrap Machine
This machine is designed to produce
round, oval or rectangular lollipops from a candy rope, by sizing, shaping, cutting off,
inserting a stick and wrapping. It is ideally suited for a candy rope with a design worked
in the centre which shows attractively through the completed wrap. The E.L.W. can also be
supplied for cutting and wrapping without inserting a stick. It is suitable for use with
high-boiled sugar or low-boiled products.
|
Style of Wrap
Twist/crimp wrap, i.e. twist at end of lollipop and crimp at the opposite end over the
stick.
Double-end crimp wrap.
Double-end twist wrap.
Fantail/rat tail twist, i.e. fantail at end of lollipop and rat tail twist at opposite end
over stick.
Wrapping Materials
Moistureproof, heat sealing, transparent cellulose film.
Reel core diameter . . . 77 mm.
Maximum outside diameter . 355 mm.
Other reel core diameters can be accommodated specially.
Lollipop Sticks
Paper stick 76 x 3 mm diameter.
Feeding
Candy: Plastic rope drawn from a suitable batch roller through four pairs
of sizing rollers.
Standard infeed height 1200 mm.
Stick: hopper.
Discharge
Alternative arrangements are possible as follows.
1. Delivery belt approximately 457 mm long.
2. Chute discharge in line with machine.
3. Chute discharge at right angles to the machine.
Speed
Up to 175 pieces per minute depending upon size and nature of the piece produced.
Interchangeability and Size Limits
Change of size is effected by change parts.
Diameter or diagonal : 25 to 44 mm
Thickness (cut-off): 8 to 16 mm
Power Requirements
Motors: Main drive: 3 h.p.
Candy knife:
3/4 h.p.
Heaters: Outer crimp: 200W
Outer
twist: 400W
Rollers:
1200W
Floor Plan
(click to enlarge)

Approximate Shipping Specification
Net weight: 1,430 kg
Gross weight : 1,730 kg
Case size : 5.1 m3
A.M.P-Rose
Heapham Road North, Gainsborough, Lincolnshire, DN21 1QU England.
Telephone: +44 (0) 1427 611969
Fax: +44 (0) 1427 616854 E-Mail: info@amp-rose.com
Due to the company policy of continuous improvement we
reserve the right to change any or all specifications without prior notice.
|