A.M.P-Rose "Miniflow" Cut And Wrap Machine
The A.M.P Rose ‘Miniflow c&w’ is a patented in line cutting and wrapping unit. This enables higher speeds than traditional cut and wrap pillow pack units. It takes a rope of confectionery product, forms and cuts it into the desired size and shape and wraps it in ‘Pillow wrap’ style.
The machine is usually fed directly from an A.M.P-Rose BR42 Batch Roller and RS66/67 Rope Sizer, or an Extruder and Cooling Tunnel.
STYLE OF WRAP
Pillow pack with crimped end seals and longitudinal fin seal laid flat against the product base. The end seals can be serrated for easy opening.
WRAPPING MATERIALS
Heat seal coated cellulose film, polypropylene laminates, co-extrusions and cold seal materials.
MACHINE SPEED
Up to 1100 packs per minute.
Up to 60 metres of film per minute.
SIZE RANGE
Length 20 to 100mm
Width 10 to 30mm
Thickness 3 to 14mm
All sizes outside this range should be referred to A.M.P Rose
POWER REQUIRMENTS
Main servo-motor 2.2kw, paper feed servo-motor 0.7kw, heaters, Total 9kw 16.1 amps
TECHNICAL DATA
All product contact parts in stainless steel or foodgrade plastic.
Overload clutch on infeed conveyor and cutter unit.
Adjustable wrapper approach rollers for smooth flow through the folding box.
Two self-centring reel holders with wrapper reel brake.
Automatic paper splicing.
Driven paper feed roller.
Adjustable web tension
One 0.7 kw servo-motor for the control of the wrapping material and the print registration.
Bag length adjustment by means of keypads on the control panel.
Photocell for the adjustment of the print registration with switch for the adjustment of cut-off position. Two-way adjustment (+/-).
Electronic speed control with automatic shutdown in case of overload.
One 2.2 kw main servo-motor with electronic speed adjustment and automatic shut-off device in case of overload.
Four electronic temperature controllers with digital read-out for accurate control of the sealing temperature.
Four pairs of fin seal wheels with automatic opening.
Pre-heated bars between 1st and 2nd set of fin seal wheels.
Transversal sealing head with 6-up crimpers.
Mechanical overload clutch on transversal sealing head pneumatically controlled by means of separate switch on control panel.
Spare parts kit
Safety devices to the highest international standards.
The control panel includes: -
Main switch
On/off switch for infeed conveyor overload clutch
Plc keypad display for adjustment of all timings and settings
4 electronic temperature controllers.
DIMENSIONS
Length 5000mm, Width 1070mm, Height 1850mm
A.M.P-Rose
Heapham Road North, Gainsborough, Lincolnshire, DN21 1QU England.
Telephone: +44 (0) 1427 611969
Fax: +44 (0) 1427 616854 E-Mail: info@amp-rose.com
Due to the company policy of continuous improvement we reserve the right to change any or all specifications without prior notice.