Rebuilt Roll-Wrapping Machines
A.M.P Rose has a very enviable reputation for the refurbishment and upgrade of
Roll wrap machinery. One of the prime reasons for this is our engineering
staff, who are probably the most experienced and knowledgeable in the world,
with expertise ranging from the design and build of the machines through to
production operation at the customers site. The number of customers who return
to us time and time again highlights proof of our success. Some of the
customers who have benefited from our service are Cadbury, Trebor Bassett,
Nestle, Mars, Haribo etc. etc. Machines are sent to our factory
from all around the world.
We can recondition your existing machine or we can supply you with one, taking your old machine in part-exchange if required.
The full reconditioning specification is as follows;
-
Total strip down – every part
-
All paint items taken down to original metal and re-painted
-
Rewire of machine to latest legislation – No existing wiring used .
-
All bearings replaced
-
All worn parts replaced
-
Rebuild
-
Factory test
-
The machine will meet current safety legislation
-
12 months guarantee on parts
-
‘CE’ marking if required:
Please click on the photos below for some close-ups of our rebuild quality;
If upgrading is required, we offer a number of options which have been developed as a result of our customers requiring to increase their machine efficiencies by use of modern technology and improved maintenance and cleaning. Typical upgrade options are as follows:-
-
New unique, electronic vibratory system for the feeder, giving infinite control of the product flow, improved waste rejection and improved waste management.
-
The mechanical vibratory feed system can be modified to give independent control of the horizontal and vertical agitation that enables the feeder to be turned to suit an individual product.
-
Short pack and no-pack no-paper system which utilize infra-red detectors in place of old mechanical systems for sensing the absence of products.
-
Short pack reject system with improved waste management.
-
The paper feed can be simplified by utilizing a servo drive and registration system. This option replaces many mechanical components that require endless adjustment and provides unequalled accuracy on the material cut-off position.
-
Powered reel unwind for a single or double wrapper system together with reel run out facilities.
-
Automatic material splicing system when only a single wrapper is required.
-
Various types of coders and printers can be fitted.
-
Improved hot melt and cold glue systems to give more positive application.
-
The wrapper gripper unit no longer needs lubrication
-
Improved wrapping head design to eliminate wear on wrapper jaw teeth, belt spindles and allowing he exchange of a wrapping head with another machine which was previously not possible.
-
Pack end sealing, inspection and reject systems.
We will be pleased to work with you to establish the best solutions to suit your budget.
You are very welcome to visit our factory in Gainsborough where we can show you examples of our rebuilding work and upgrade options. We can also arrange to visit your site and survey your existing machines. For all your Roll wrap machine requirements, contact the professionals;
A.M.P-Rose
Heapham Road North, Gainsborough, Lincolnshire, DN21 1QU England.
Telephone: +44 (0) 1427
611969
Fax: +44 (0) 1427 616854 E-Mail: info@amp-rose.com
Due to the company policy of continuous improvement we reserve the right to change any or all specifications without prior notice.